Ok kiddsI have the system put together and still have an issue. I have a 16*14 3blade prop and a 0913 motor sevcon gen 4 & 8 J305s   (DIY kit from Thunderstruk EV  realy good people) The boat is a 77 Morgan 33O/I 14500lb 27'l wl 11'8" beam 3'9' draft full keel@ 48v I started with 2:1 reduction and have changed to 3:1 useing the 1in L seires 3/8 pitch belt@ about 125amps the belt goes up in smoke. It will run allday @ 30-50 amps I have been checking out other members stats and every one…See More

Which hull do you think would make the best electric conversion, in terms or regen, battery location, or any other observations you might have? Looks like the Cherokee bilges might be a bit shallow for batteries?Thanks!See More

I'm on the hunt for a cheap old cruising sailboat to electrify for Lake Michigan and future long range cruising. I'm currently considering a Cal 30-1, Chris Craft Cherokee 32, and various Cheoy Lee Offshore models from 30 to 40 ft.Before I buy a boat, I figured it would be wise to get some input on what to look for or avoid in a good conversion candidate. Any general input appreciated. Most boats I'm looking at have an old atomic 4.I'm considering a 10kw electric yacht system, although I keep…See More

The Friendship Sloop Sarah Mead hits the water with her brand new electric propulsion system.

DEar collegues,After some time without changes on the net resources, due that we are focused on the product development and investigation, we remake our webseite at INNOVANAUTIC, we invite all of you to visit the web page www.innovanautic.com and talk about it and about your impressions.Best regards,See More

User Group for SolidNav

I bought David Carrolls Catalina 30 with the SolidNav Explorer in it that didn't work. It was giving the 3 blinks code on the LED flash and sometimes 4 blinks on the LED flash.I called Thunder Struck Motors who are extremely smart and helpful people and talked to them about what would be  the best route to take to fix the system. After exploring all options. I decided to buy a brand new GEN4 Controller, the wiring harness, and the new style better throttle control and have it all programmed…See More

User Group for SolidNav

Recently I built a helm instrumentation panel so I could keep and eye on battery voltages and current draw on the propulsion bank without leaving the helm while underway. It worked out pretty good though I still have to mount it permanently. The links to the process I went through are here:http://biankablog.blogspot.com/2013/02/instrumentation-project-part-one-plan-a.html…See More